We finally received our order of Aluminum camera mounts! HOWEVER, the mounts we received had ZERO threads in them.. This meant that there was no way to screw them into the rest of the frame. SO we have begun HAND tapping every single mount. Also due to the size of the pre existing holes, we will be increasing the screw size on this batch over to M2.5 (we will return back to M2 after this batch). Weight increases marginally with M2.5. Also, the screws actually screw Into the carbon plates relatively easily, so all replacement frames, both top and bottom plates shouldn't be an issue with the larger 2.5 screws if you so happen to purchase replacement plates down the road. Alternatively, you can also use a small file to enlarge the holes if you would rather not screw into the carbon. SO just to be clear, all carbon on this batch of M2.5 screws will have the correct 2.5mm diameter holes drilled in the front sections of the carbon, so there will not be a need to enlarge the holes yourself. We will be burning the midnight oil over the next couple of weeks or longer in order to complete the kits.
One last thing! We will be releasing batches of Sub Atomics as we go.
92mm motor to motor
Motor support: 6.6mm and 9mm
2 INCH prop cap
14mm Nano cam support
Insta360GO compatible W/included mounts
AdditionalFREE .stl Insta360Go mounts (Scroll to the bottom ;)
Cineshot style DC frame with added rear bracing to support the slightly larger 2 inch frame.
Top mount for a little freestyle
Bottom mount when running an Insta360Go
Native JHEMCU GHF13AIO16x16 design, to allow for a clean, slammed deck, center of mass sweet spot build! Meaning, we designed the Sub Atomic around and for the JHEMCU GHF13AIO. However, you can just add spacers if you want to run a traditional 16x16 stack.
Aluminum Camera mounts
HD camera base adapter
Hybrid mini Immortal T mount & Single antenna mount
High quality 3k chamfered carbon
MOTOR SCREWS! Yes :) motor screws included to fit THIS frame. No more guess work.